YASTUDIO Logo
| En

Car & Bike

WORKS / 74' VW Type-2 LateBay BUS




69. Key fob system (rear cargo door)

(2019.09.29 / worked in 2018.08.12)

For the rear door, a wooden block was used to block the push button. At last, A key fob system was installed on the all door of my BUS!!

12 Key fob system (rear cargo door) 11 Key fob system (rear cargo door) 10 Key fob system (rear cargo door) 09 Key fob system (rear cargo door) 08 Key fob system (rear cargo door) 07 Key fob system (rear cargo door) 06 Key fob system (rear cargo door) 05 Key fob system (rear cargo door) 04 Key fob system (rear cargo door) 03 Key fob system (rear cargo door) 02 Key fob system (rear cargo door) 01 Key fob system (rear cargo door)

68. Key fob system (sliding door)

(2019.09.28 / worked in 2018.07.30)

Next, A key fob system was installed on the slide door! The mechanism of the sliding door lock cannot be accessed because the key cylinder and lock unit are integrated. If you put the actuator in the sliding door, electrical wiring is difficult (Wiring of slide range is required). That's why I came up with this way.

06 Key fob system (sliding door) 05 Key fob system (sliding door) 04 Key fob system (sliding door) 03 Key fob system (sliding door) 02 Key fob system (sliding door) 01 Key fob system (sliding door)

67. Key fob system (front door)

(2019.09.19 / worked in 2018.07.22)

A key fob system was installed on the front door! In the standard state, the door lock mechanism was too hard and the actuator could not open or close the lock. Therefore, the coil spring that creates a click feeling has been removed.

13 Key fob system (front door) 12 Key fob system (front door) 11 Key fob system (front door) 10 Key fob system (front door) 09 Key fob system (front door) 08 Key fob system (front door) 07 Key fob system (front door) 06 Key fob system (front door) 05 Key fob system (front door) 04 Key fob system (front door) 03 Key fob system (front door) 02 Key fob system (front door) 01 Key fob system (front door)

66. Seat side pocket

(2019.09.17 / worked in 2018.07.08)

A plastic basket and a drink holder for bicycles were combined and attached to the side of the front seat. The basket was painted with black stone spray. It is cheap but very convenient!

03 Seat side pocket 02 Seat side pocket 01 Seat side pocket

65. Rear speaker upgrade

(2019.09.16 / worked in 2018.06.24)

Added acoustic network (for BOSE 501X shadow base box) to rear speaker (BOSE 301 woofer). The backward speaker above the head is the tweeter of the BOSE 301... this is a just extra.

07 Rear speaker upgrade 06 Rear speaker upgrade 05 Rear speaker upgrade 04 Rear speaker upgrade 03 Rear speaker upgrade 02 Rear speaker upgrade 01 Rear speaker upgrade

64. Front speaker upgrade

(2019.09.15 / worked in 2018.06.23)

Upgraded front speaker from BOSE 301 tweeter to 501X cube speaker! The sound is very good!!

05 Front speaker upgrade 04 Front speaker upgrade 03 Front speaker upgrade 02 Front speaker upgrade 01 Front speaker upgrade

63. Tail light guards

(2019.09.14 / worked in 2018.05.01)

I made a tail light guard by brazing an aluminum bar. Since there is no strength, it is just an accessory. ;-)

07 Tail light guards 06 Tail light guards 05 Tail light guards 04 Tail light guards 03 Tail light guards 02 Tail light guards 01 Tail light guards

62. Front mount carrier for bicycle

(2019.09.09 / worked in 2018.04.20-22)

I made a frame for loading bicycle on front of the BUS. Use this to take a bike home from a nearby station. This eliminates the need to put a it in the BUS.

08 Front mount carrier for bicycle 07 Front mount carrier for bicycle 06 Front mount carrier for bicycle 05 Front mount carrier for bicycle 04 Front mount carrier for bicycle 03 Front mount carrier for bicycle 02 Front mount carrier for bicycle 01 Front mount carrier for bicycle

61. Replace clutch wire & clevis pin

(2019.09.08 / worked in 2018.04.06)

Since the clutch wire joint was worn and broken, the clutch wire and clevis pin were replaced. I never thought this would break before the wire broke...



60. Glove box partition

(2019.09.07 / worked in 2018.03.31)

I created partitions so that small items can be easily put in and out, at the same time as updating the glove box.

05 Glove box partition 04 Glove box partition 03 Glove box partition 02 Glove box partition 01 Glove box partition




- END -