YASTUDIO Logo
| En

Car & Bike

86' HONDA CITY CABRIOLET
In 1989, I got this cabriolet second hand (It's 1986 model). I left it at my parent's house for about 10 years and got it back in 2007 when I bought land and house. This is a record of repairs and modifications since that time.



27. Wire tuck right side

E:2020.09.21 / W:2020.07.10←06.28

26. Rust hole repair

Entr:2020.09.19 / Work:2020.06.24←08
Repairing rust holes at the base of the wiper 20

An important challenge in this rehabilitation plan is closing the holes in the base of the wiper. About 20 years ago, I noticed the condition of the part when I swap to the turbo engine, and at that time I only treated it with rust prevention. A small hole was visible from the engine room side. So I decided to repair it this time.

Cover the cleaned engine compartment side, remove the top cover and peripherals, mask the windshield, use a wire brush to roughly remove any rust around the holes, and then reapply the rust inhibitor. Use a repair putty to close the hole. Rough polishing, putty application, polishing, thin putty, and polishing are repeated many times to prepare the surface, and finally painting. Finish with a glass coating. It completed!!


25. Wire tuck left side

E:2020.09.20 / W:2020.06.20

24. Engine head creaning

E:2020.09.18 / W:2020.06.07

23. Front section inner cleaning (left)

E:2020.09.15 / W:2020.05.31

22. Front section inner cleaning (right)

E:2020.09.13 / W:2020.05.24←16

21. Screw holes for the front grill

E:2020.09.12 / W:2020.05.16

20. Rear bumper&under skirt remake

E:2020.09.11 / W:2020.05.10←05

19. Change the side skirt

E:2020.09.10 / W:2020.05.09←04

18. Wiring repair to fuel pump

E:2020.05.15 / W:2020.05.02

17. Height Adjustable Suspension

E:2020.05.14 / W:2019.04.21



- END -