76. Air intake tube

Entry:2022.06.12 / Work:2022.06.12

The air intake tube had been damaged due to aging, so I was looking for a replacement. And the air intake tube of the same Honda's first generation HR-V fitted perfectly. In the original state, the air intake get closed by negative pressure, so I fixed the opening with bolts and nuts.

Photos

When the accelerator is fully opened, the suction port closes tightly due to the negative pressure, so hold it with a bolt.

Perfect angle and length!
This is exactly what I call a Cinderella fit.

The opening of the connection seems a little wide, but it fits good when inserted all the way in. It should be no problem.

There is a difference in height between the top and bottom, which is also approximately the same.

The original Air intake tube fits like this.

The edges of the bellows are tattered, and the thought of a car sucking in the debris is not good for my mental health.

E:2022.06.11 / W:2022.06.05

E:2022.06.04 / W:2022.06.04

E:2022.05.22 / W:2022.05.15

E:2022.05.12 / W:2022.05.08

E:2022.05.05 / W:2022.05.05←03.21

E:2022.05.01 / W:2022.05.01←04.24

E:2022.04.17 / W:2022.04.10←01

E:2022.03.21 / W:2022.03.19

E:2021.12.11 / W:2021.12.04,05

- END -