E:2021.11.20 / W:2021.11.14
64. Structural color glass film
Entry:2021.11.13 / Work:2021.11.07
It looks quite blue when viewed from directly across.
The color is very light when viewed from the inside.
Finally, the film putted on the slide glass.
Spray and stick it on, and drive out air and water.
Next is the triangular window. The film is cut by applying a piece of paper cut in the shape of the glass.
Put the glass back in place and seal it with a plastic substitute from a garbage bag.
Spray with diluted mild detergent water, position and drive out air and water with a squeegee.
A film cut to fit the shape of the glass is applied to the glass.
Put masking tape as a guideline at a place slightly inside from the position where it appears on the outside.
The hidden part is dirty.
Peel off the lining to remove the rear side glass. Vinyl is tattered.
It looks like a gradation depending on the angle.
E:2021.11.08 / W:2021.11.03
E:2021.11.06 / W:2021.10.30
E:2021.10.31 / W:2021.10.29
E:2021.10.24 / W:2021.10.23
E:2021.10.23 / W:2021.10.17
E:2021.10.16 / W:2021.10.16
E:2021.10.10 / W:2021.10.10
E:2021.10.09 / W:2021.10.09
E:2021.10.06 / W:2021.10.04