« HONDA CITY CABRIOLET TURBO2
81. Thermometer with an original panel
E:2022.08.11 / W:2022.08.09←06
79. Main power and starter switch
Entry:2022.07.30 / Work:2022.07.24
I had been longing for a push type engine starter switch, and the first time I made one was in June 2000. Use three relay, one for accessories power and the other for main power and the last one for turning the cell starter, and took the connector part of the wiring that extends to the key cylinder and wired them.
The unit which had been removed before for the semi-restoration that began in Golden Week, 2020, was reviewed, the wiring, which was previously wired with the help of connector terminals, was re connected this time by soldering and although the configuration was the same connected in parallel by interrupting to the wiring extending to the key cylinder.
The panel cut out of low foam PVC board is also used as it was, and it fits together nicely. I know it's not exactly unusual in today's cars, but this makes me feel good!
The wiring of the one made in 2000 was reviewed, soldered connections were made, and interrupted into the wiring extending to the key cylinder and connected in parallel with the key cylinder.
I recheck the wiring by comparing it to the energization pattern in the maintenance manual.
Confirming operation...
This was installed in 2000, and the wiring extending to the key cylinder was taken and connected.
78. LED ring projector headlight
E:2022.07.18 / W:2022.07.17
77. CITY Meeting in Fukushima 202206
E:2022.07.02 / W:2022.06.19
76. Air intake tube
E:2022.06.12 / W:2022.06.12
75. 2022 HONDA in The Showa Era Meeting
E:2022.06.11 / W:2022.06.05
74. Light control system
E:2022.06.04 / W:2022.06.04
73. 34th MOONEYES Street Car Nationals
E:2022.05.22 / W:2022.05.15
72. Mirror writing sticker
E:2022.05.12 / W:2022.05.08
71. Bumper Cover Protector
E:2022.05.05 / W:2022.05.05←03.21
70. ECU fixed base
E:2022.05.01 / W:2022.05.01←04.24
69. Fender repair and paint
E:2022.04.17 / W:2022.04.10←01
68. Wooden steering wheel
E:2022.03.21 / W:2022.03.19
67. RECARO seat install
E:2021.12.11 / W:2021.12.04,05
66. RECARO seat custom
E:2021.12.04 / W:2021.11.28
65. License lamp lens custom
E:2021.11.20 / W:2021.11.14
64. Structural color glass film
E:2021.11.13 / W:2021.11.07
63. Repair some tears
E:2021.11.08 / W:2021.11.03
62. CITY Meeting in Fukushima
E:2021.11.06 / W:2021.10.30
61. Logo decal on the body side
E:2021.10.31 / W:2021.10.29
60. Rear Reflection line redo
E:2021.10.24 / W:2021.10.23
59. 15inch wheel decoration
E:2021.10.23 / W:2021.10.17
58. Rear speaker update
E:2021.10.16 / W:2021.10.16
57. Side & rear line update
E:2021.10.10 / W:2021.10.10
56. Third brake light
E:2021.10.09 / W:2021.10.09
55. Vehicle inspection
E:2021.10.06 / W:2021.10.04
54. Front full cover
E:2021.09.11 / W:2021.09.05←07.25
53. Bumper cover additional machining
E:2021.09.04 / W:2021.08.22
52. Bumper bra making
E:2021.08.20 / W:2021.08.15←07
51. Front grille cover
E:2021.08.07 / W:2021.08.01
50. Nose bra production
E:2021.08.01 / W:2021.07.31←25
49. Adjustment the rear glass position
E:2021.07.24 / W:2021.07.24←22
48. Daytime Running Light Dimming
E:2021.05.06 / W:2021.05.04
47. LED headlight bulbs
E:2021.01.11 / W:2021.01.10
46. Roof spoiler
E:2020.12.30 / W:2020.11.30
45. Voltmeter installation
E:2020.12.12 / W:2020.11.29
44. Side marker function
E:2020.11.21 / W:2020.11.08←02
43. Molding trim for the soft top
E:2020.11.20 / W:2020.11.04
42. Torque rod insulator replace
E:2020.11.15 / W:2020.11.03
41. White/Black Steering wheel
E:2020.11.14 / W:2020.11.02←01
40. Soft top replace
E:2020.11.08 / W:2020.10.25←24
39. Rear window glass assembly
E:2020.11.07 / W:2020.10.24←09.13
38. Side skirt extension
E:2020.11.03 / W:2020.10.11←06
37. Reflection line
E:2020.11.06 / W:2020.10.11
36. Rear stabilizer adjustment
E:2020.11.02 / W:2020.10.01
35. Wheels 15inch → 16inch
E:2020.11.01 / W:2020.09.27
34. Clear blinker lens (Rear)
E:2020.10.30 / W:2020.09.12←08.03
33. CITY name plate
E:2020.10.24 / W:2020.09.06
32. 16inch wheel custom
E:2020.10.17 / W:2020.08.30
31. To multi reflector headlights
E:2020.09.27 / W:2020.08.26
30. Paint the air cleaner cover
E:2020.09.26 / W:2020.08.14←09
29. Front bumper&spoiler repaint
E:2020.09.24 / W:2020.08.09←07.18
28. Front grille repaint
E:2020.09.23 / W:2020.07.25
27. Bonnet&striker cleaning
E:2020.09.22 / W:2020.07.12
26. Wire tuck right side
E:2020.09.21 / W:2020.07.10←06.28
25. Rust hole repair
E:2020.09.19 / W:2020.06.24←08
24. Wire tuck left side
E:2020.09.20 / W:2020.06.20
23. Engine head creaning
E:2020.09.18 / W:2020.06.07
22. Front section inner cleaning (left)
E:2020.09.15 / W:2020.05.31
21. Front section inner cleaning (right)
E:2020.09.13 / W:2020.05.24←16
20. Screw holes for the front grill
E:2020.09.12 / W:2020.05.16
19. Rear bumper&under skirt remake
E:2020.09.11 / W:2020.05.10←05
18. Change the side skirt
E:2020.09.10 / W:2020.05.09←04
17. Wiring repair to fuel pump
E:2020.05.15 / W:2020.05.02
16. Height Adjustable Suspension
E:2020.05.14 / W:2019.04.21
15. Tire replace to 165/45/15inch
E:2020.08.23 / W:2019.04.15
14. 2nd Car Meeting
E:2020.08.22 / W:2019.03.21
13. Gas charge for cooler
E:2020.05.10 / W:2018.06.01
12. Muffler replace
E:2020.05.09 / W:2018.05.26
11. Wheel cap install
E:2020.07.18 / W:2016.11.20
10. Twin ring Motegi meeting 2015
E:2020.06.13 / W:2015.10.18
9. Cooler compressor belt replacement
E:2020.06.02 / W:2013.08.24
8. 2012, at home parking lot
E:2020.05.31 / W:2012.10.21
7. CITY Meeting 2011 @Suzuka Circuit
E:2020.05.29 / W:2011.11.23
6. Wheel & Tire change
E:2020.05.28 / W:2011.10.08
5. Side skirt (Rain gutter)
E:2020.05.10 / W:2008.07-08
4. Closed two holes
E:2020.05.09 / W:2007.06.15
3. Soft top repair
E:2020.05.09 / W:2007.06.03
2. Grand effect restart
E:2020.05.06 / W:2007.04.01
1. My CITY CABRIOLET is back!
E:2020.05.06 / W:2007.02.04
- END -