YASTUDIO Mark
| En
シティカブリオレ アイコン VW タイプ2 バス アイコン ダイハツ エッセ アイコン

« HONDA CITY CABRIOLET TURBO2


Num of articles:  

50. Nose bra production

E:2021.08.01 / W:2021.07.31←25

49. Adjustment the rear glass position

Entry:2021.07.24 / Work:2021.07.24←22
HONDA CITY CABRIOLET TURBO2 : Adjusted around the back window glass assembly. 13

The position of the rear window glass assembly has been lowered, so I adjusted it. The upper side of the second photo is the state before adjustment, and the lower side is the after.

I have made three changes for the adjustment. First, I moved the position of the upper rubber mall upward. Next, I strengthened the rubber band of the belt that pulls up the rear glass. Third, I raised a little the base of the rear window glass assembly by putting a washer.

Adjusted around the back window glass assembly. 12

Before / After.

Adjusted around the back window glass assembly. 11

Put on the plastic cover.

Adjusted around the back window glass assembly. 10

Slightly float the plate that holds the rear window assembly.

Adjusted around the back window glass assembly. 09

The band was ready.

Adjusted around the back window glass assembly. 08

This time I have an industrial sewing machine, so it's easy.

Adjusted around the back window glass assembly. 07

I found a suitable band at a home center.

Adjusted around the back window glass assembly. 06

Slightly shift the position of the rubber seal and sew again.

Adjusted around the back window glass assembly. 05

I'm working with the glass in place, so I'm careful.

Adjusted around the back window glass assembly. 04

It is difficult to insert these countless screws into the holes.

Adjusted around the back window glass assembly. 03

I removed the rear window assembly again.

Adjusted around the back window glass assembly. 02

Roll up the soft top.

Adjusted around the back window glass assembly. 01

Work completed.


48. Daytime Running Light Dimming

E:2021.05.06 / W:2021.05.04

47. LED headlamp

E:2021.01.11 / W:2021.01.10

46. Roof spoiler

E:2020.12.30 / W:2020.11.30

45. Voltmeter installation

E:2020.12.12 / W:2020.11.29

44. Side marker function

E:2020.11.21 / W:2020.11.08←02

43. Molding trim for the soft top

E:2020.11.20 / W:2020.11.04

42. Torque rod insulator replace

E:2020.11.15 / W:2020.11.03

41. White/Black Steering wheel

E:2020.11.14 / W:2020.11.02←01

40. Soft top replace

E:2020.11.08 / W:2020.10.25←24

Num of articles:  

- END -