24. Wire tuck left side

Entry:2020.09.20 / Work:2020.06.20

When I was cleaning the engine room, I felt like I could do it myself, so I tried wire tack. The wiring connection coupler and the large resistor were pushed into the gap of the fender.The necessary wiring was routed from an inconspicuous place. The wiring to the wiper motor was passed through the frame under the wiper and pulled out from directly under the motor to connect.

Photos & Working

The connector part is hidden when the wiper motor cover is attached.

Pull out the cable that connects to the wiper motor from the back space directly under the motor.

When the air duct is set, the cable becomes invisible. It's the intended effect!

The necessary cables were routed from the air intake under the air duct to the engine compartment.

Other wires and resistors are pushed into the fender side.

Only one thick cable visible below needs to be pulled into the engine compartment.

E:2020.09.18 / W:2020.06.07

E:2020.09.15 / W:2020.05.31

E:2020.09.13 / W:2020.05.24←16

E:2020.09.12 / W:2020.05.16

E:2020.09.11 / W:2020.05.10←05

E:2020.09.10 / W:2020.05.09←04

E:2020.05.15 / W:2020.05.02

E:2020.05.14 / W:2019.04.21

E:2020.08.23 / W:2019.04.15

- END -