YASTUDIO Mark
| En
シティカブリオレ アイコン VW タイプ2 バス アイコン ダイハツ エッセ アイコン

« DAIHATSU ESSE CUSTOM


Num of articles:  

5. Front spoiler

E:2020.05.25 / W:2009.04.19

4. Lower it further

Entry:2020.05.24 / Work:2009.04.04
DAIHATSU ESSE Maintenance & Custom : Lower it further 05

I set my ESSE height to the lowest with height adjustment suspension. And I came up with a way to further reduce the vehicle height! For the front suspension, I removed one of the adjusting rings and for the rear suspension, I removed both rings so that the coil hits the base directly. The front is about -5mm and the back is -15mm, it still is tilted slightly forward. This difference is difficult to recognize in the photo size...

Lower it further 04

The front is about -5mm without one adjuster ring.

Lower it further 03

It will fall about 20mm further from the state where the adjustment ring is raised to the maximum.

Lower it further 02

Set the cut rubber ring on the surface where the coil hits.

Lower it further 01

Cut out the ring from the rubber sheet with a circle cutter.


3. Height adjustable suspension

E:2020.05.23 / W:2009.03.29

2. MOONDISC & Home made White Ribbon

E:2020.05.22 / W:2009.03.22

1. ESSE came to our home!

E:2020.05.17 / W:2007.08.03

Num of articles:  

- END -