121. Push pod & pin replacement

Entry:2019.12.11 / Work:2019.07.05

Since the push rod and pin of the accelerator pedal had been weared, I replaced them. The rod has been updated to the ball joint type!

Photos & Making

I fixed it using a lock nut.

It's seems so sturdy.

The left is the ball joint type rod adopted this time.

This is the accelerator pedal rod, and the bent part on the front side and the hole are unevenly worn.

When I removed the pedal, the pin on the rotating shaft was also worn out, so I replaced it.

E:2020.08.24 / W:2019.05.13

E:2019.12.08 / W:2019.03.31

E:2019.12.03 / W:2019.03.24

E:2020.08.22 / W:2019.03.21

E:2020.08.20 / W:2019.03.17←16

E:2019.12.02 / W:2019.03.03

E:2019.12.01 / W:2019.02.25

E:2019.11.30 / W:2019.01.27

E:2019.11.18 / W:2018.12.23

- END -