« VW Type-2 LateBay BUS
126. Rear panel sheet
125. DC-AC inverter and line auto selector
I want to be able to use home appliances in my BUS, so I installed a DC-AC inverter and automatic selector that switches between external and internal wiring.
I put the automatic changeover switch in the box under the seat behind the driver's seat.
This is an automatic switching machine between the inverter and the external power supply. If there is an input from the outside, it will give priority to that.
Put the lid on and make it the same height as the cushioning mat.
The space above the inverter is used as an accessory case.
When I turned the inverter upside down, the fixed stays got caught on the left and right helicopters in a good way.
The wiring from the inverter is passed through the engine room from the bottom of the spare tire storage and connected to the sub-battery.
I lowered the wiring from the hole that was vacant under the seat behind the driver's seat and attached the outlet plug. Use an extension cord to connect to an external outlet.