YASTUDIO
%s

Sewing and other miscellaneous idea works

裁縫と、その他雑多な思いつき工作の物達

« Other works

« その他の工作

Sewing-related works, and miscellaneous idea work that does not fall into other categories.
裁縫関連と、他のカテゴリーに入らないような、雑多な思いつき工作のあれこれ

Added a deceleration mechanism on the sewing machine.

工業用ミシンへ減速機構の追加

(2021.09.25 / Made in 2021.09.18←4)

Although it is a servo motor specification, a reduction mechanism has been added because it is too fast and not easy to use. When decelerating electrically, the force weakens, so I used a pulley to decelerate. Since it slowed down to 1/4, the torque is quadrupled. It became easier to use.!
総合送りの腕ミシン、TAKING社の 'TK-8B'、サーボモーター仕様ではあるものの、工業用ミシン故か、動き始めの速度が速すぎて、技術も気持ちもついていけなかったので、減速機構を追加しました。電気的に速度を落とすと力が弱くなるので、プーリーを使って1/4に減速、その分縫う力は4倍に。断然使い易くなりました! 平ミシン化についてはこちら...
シティのフロントフルカバーを作ってみました...
シティカブリオレの幌の補修をしてみました...

The initial speed of the industrial sewing machine was too fast, so I used a pulley to decelerate it.. / 工業ミシンは初速が早すぎたので、プーリーを使って減速 process6 The initial speed of the industrial sewing machine was too fast, so I used a pulley to decelerate it.. / 工業ミシンは初速が早すぎたので、プーリーを使って減速 process 5 The initial speed of the industrial sewing machine was too fast, so I used a pulley to decelerate it.. / 工業ミシンは初速が早すぎたので、プーリーを使って減速 process 4 The initial speed of the industrial sewing machine was too fast, so I used a pulley to decelerate it.. / 工業ミシンは初速が早すぎたので、プーリーを使って減速 process 3 The initial speed of the industrial sewing machine was too fast, so I used a pulley to decelerate it.. / 工業ミシンは初速が早すぎたので、プーリーを使って減速 process 2 The initial speed of the industrial sewing machine was too fast, so I used a pulley to decelerate it.. / 工業ミシンは初速が早すぎたので、プーリーを使って減速 process 1

CITY body cover shape fitting.

シティのボディカバーの形状調整

(2021.06.19 / Made in 2021.06.13)

It was a general purpose body cover for a small hatchback, so too big for my 'CITY' then the hem had reached the floor. (It may be due to the low down ;-) And the cover did not fit the shape of the car, so there was excess fabric. Therefore, I sewed it with the sewing machine for fitting to the shape.
小型ハッチバック用の汎用ボディーカバーで、大き過ぎて床面についてしまっていたし(ローダウンしてるから!)ボディ形状にも合ってなくて生地が余ってしまっていたので、導入した工業用ミシンで縫って詰めて、形を合わせました〜 仕上がりは今2つな感じになってしまったけども、床上 1cm 程度の所で収まったので、要件的には OK としましょう。


Bag & Curtain for Diveaway tent

ドライブアウェイテント用のカーテンと収納袋を作成

(2019.06.22 / Made in 2017.09)

4 bugs for tent, frame-pipe, curtain and other parts.
IKEA でカーテン生地を買ってきて、ドライブアウェイテントとそのフレームパイプ、カーテン、その他のパーツを入れる袋、計4点を縫合しました。


Making a flag garland

フラッグガーランド作成

(2019.06.22 / Made in 2016.10)

Choose some cloths, Cutting, sewing and through stringing.
同じ色合いの生地を、切って、縫って、紐を通して完成。


Akabeko painting Dalahast

ダーラナホースの赤ベこカラーリング

(2019.06.22 / painted in 2016.08)

I painted Swedish "Dalahast" with a color pattern of "Akabeko"
= "Red bull", folk toy of Fukushima Prefecture, Japan.
ダーラナホースペイント教室で、赤べこカラーに塗りました〜


Improvement of Cars mask for BUS

バス用カーズマスクの改良

(2019.06.22 / painted in 2016.04)

I got a Cars (like) mask for Latebay BUS and improved it.
バス仲間で海外より取り寄せたカーズマスクを改良しました。


Stand for THERMOS JAG

サーモスジャグ用スタンドの制作(プラごみ缶流用)

(2019.06.22 / painted in 2015.02)

I cutted a plastic trash can and put an orange cutting sheet.
プラ製ゴミ箱を加工し、オレンジのシールシートを貼りました。
中にピッタリ収納できて、これぞ正にシンデレラフィット!?


- END -