91. Replaced rear suspension rubbers.

Entry:2023.05.21 / Work:2023.05.14

I found a replacement for the lower seat of the rear coil spring and the rubber mount on the top of the shock absorber that I had been worried about before, so I replaced it.

For the coil spring lower seat, I modified it that for my ESSE and reused it. As for parts, this seems to be used in CR-Z and Freed. Part number: 52725-TG5-C01, I wonder if it is also used in other models?

Photos & Working

Nothing changes in appearance.

At the same time, the wheels and tires were changed from 16" to 15".

I ordered only 2 without knowing that I would use 2 top and bottom on one side, so this time I replaced only the bottom.

Since it is sandwiched from the top and bottom, use two of them on one side. The lower rubber mounts that supported the load were flattened.

The processed lower seat fits into the lower arm.

The outer circumference of the bottom also has corners, so round them.

The ESSE sheet has one sharp point, so cut it there.

The rear coil spring, the original seat on the upper right, and the seat for the ESSE on the lower right.

The rear coil spring lower seat is already worn out.

E:2023.04.16 / W:2023.04.15

E:2022.12.10 / W:2022.12.02,03

E:2022.10.02 / W:2022.10.01

E:2022.09.10 / W:2022.09.10

E:2022.09.04 / W:2022.09.03

E:2022.09.03 / W:2022.08.30

E:2022.09.02 / W:2022.08.28

E:2022.08.20 / W:2022.08.20←06.04

E:2022.08.13 / W:2022.08.11

- END -