17. MOON DISC again

Entry:2020.09.03 / Work:2020.02.15

I used to wear MOON DISK IR, which has a claw and can install direct, but when I ran, I heard scratch?noise. So, this time, I choiced the traditonal MOON DISK, which has only disk part. Tap the genuine wheel cap made of resin, insert the screw from the back, and fix it with the cap nut from the front side through the hole in the disc. The edges are warped and the gaps are noticeable, so I added a rim guard and painted it white. Combined with the white ribbon, it's looks good!

Photos & Working

The edge of the disc is warped and there is a gap, so I put a rim guard on it. There was no white, so I bought it orange and painted it.

Pass the screws through the 3 holes for fixing the moon disc, insert the resin washer and fix it with the cap nut.

Screw in the 5mm screw from the back and expose it. I decided the hole position one by one by matching the actual product.

Get a suitable genuine wheel cap, drill a hole for the screw that fixes the disc, and cut the screw.

Commemorative photo with the completed Moon disc cap.

E:2020.09.02 / W:2020.02.14←09

E:2020.09.01 / W:2020.02.02

E:2020.08.31 / W:2020.01.18←13

E:2020.08.16 / W:2018.10.21

E:2020.08.14 / W:2018.09.02

E:2020.06.05 / W:2013.09.08

E:2020.06.04 / W:2013.09.01

E:2020.06.03 / W:2013.08.25

E:2020.05.30 / W:2012.04.22

- END -