YASTUDIO Mark
| En
シティカブリオレ アイコン VW タイプ2 バス アイコン ダイハツ エッセ アイコン ボルボ S60 アイコン

« HONDA CITY CABRIOLET TURBO2


Num of articles:  

40. Soft top replace

E:2020.11.08 / W:2020.10.25←24

39. Rear window glass assembly

Entry:2020.11.07 / Work:2020.10.24←09.13

About 20 years ago, I got a good soft top (but it rear part is not good condition) from a demolish yard, and 10 years ago I got a new one at Yahoo Auction, but since there was no Rear window glass assembly, I decided to make it.

First, I cut the fabric from the used soft top, aligned it, and proceeded to the point where I could sew it with a professional sewing machine. Next, I went to a friend's house who have an industrial sewing machine to help me sew a thick part.

After the suturing work is completed, cut out the place where the glass will enter and glue the metal frame (using the penguins cement 334C specified by the manufacturer).

I heard that Kongo rope is suitable for inserting glass (it seems to be a kind of knitting method), wrap it around the groove of the glass shield, pull the rope and put it in the frame...

I had a hard time adjusting the position after the glass was inserted, but I managed to fit it!!

Rear window glass assembly remake 27

It was completed!

Rear window glass assembly remake 26

Wrap a rope around the groove on the outer circumference of the rubber frame and fit it into the frame.

Rear window glass assembly remake 25

After confirming that the fabric is firmly attached to the frame, set the glass and rubber frame and try to match them.

Rear window glass assembly remake 24

I'm going to turn it to the back side and hold it with a clip.


Rear window glass assembly remake 23

Align the frame and press it with a roller.

Rear window glass assembly remake 22

Mark the frame position and apply cement.

Rear window glass assembly remake 21

It will be glued to the frame, so cut it leaving the fabric.

Rear window glass assembly remake 20

Cut out where the glass will fit.

Rear window glass assembly remake 19

Sew the zipper onto the outer fabric. I sewed this myself.

Rear window glass assembly remake 18

Check where the fabric overlaps.

Rear window glass assembly remake 17

The seams are misaligned, but I think it's fine because it's hidden.

Rear window glass assembly remake 16

Cover the edges with rubber bias tape.

Rear window glass assembly remake 15

My friends are used to it, so he is good at it.

Rear window glass assembly remake 14

Overlap and sew the bottom part where the core will fit.

Rear window glass assembly remake 13

We want to sew again, so we are undoing the seams.

Rear window glass assembly remake 12

A friend who has an industrial sewing machine helped me with the thicker parts.

Rear window glass assembly remake 11

Is it rubber bias tape? Cover the edge of the fabric.

Rear window glass assembly remake 10

It seems that there was a white type and a black type inside the fabric.

Rear window glass assembly remake 09

This is what happens when you sew and tighten the zipper.

Rear window glass assembly remake 08

The side where the glass enters and the outside are completed.

Rear window glass assembly remake 07

Sew a rubber seal on the overlapping part.

Rear window glass assembly remake 06

However, the line is misaligned on the front side.

Rear window glass assembly remake 05

I was able to sew it neatly with the same width.

Rear window glass assembly remake 04

The zipper is also ported from the original.

Rear window glass assembly remake 03

The exterior uses the original in good condition.

Rear window glass assembly remake 02

Temporarily fasten the zipper to the fabric on the side where the glass fits and sew.

Rear window glass assembly remake 01

I borrowed a tailor‐use sewing machine.


38. Side skirt extension

E:2020.11.03 / W:2020.10.11←06

37. Reflection line

E:2020.11.06 / W:2020.10.11

36. Rear stabilizer adjustment

E:2020.11.02 / W:2020.10.01

35. Wheels 15inch → 16inch

E:2020.11.01 / W:2020.09.27

34. Clear blinker lens (Rear)

E:2020.10.30 / W:2020.09.12←08.03

33. CITY name plate

E:2020.10.24 / W:2020.09.06

32. 16inch wheel custom

E:2020.10.17 / W:2020.08.30

31. To multi reflector headlights

E:2020.09.27 / W:2020.08.26

30. Paint the air cleaner cover

E:2020.09.26 / W:2020.08.14←09

Num of articles:  

- END -