94. Bumper Cover Protector (remake)

Entry:2023.06.18 / Work:2023.06.11

I remade the front bumper cover protector. I think that it was broken by the wind pressure at high speed because it was fixed in the rear and because it was made of soft material. As a countermeasure, I fixed it at the front part this time.

I think the fixed position angle raised the front of the board, which made it harder to bend downwards.

The hole in back was the fixed position last time, and this time it was fixed in the front.

Paste the seal sheet cut out with a cutter plotter on the board and cut it.

Import to Mac and create outline data.

I put it together and took a picture.

Collected boards. It looks more ripped than broken.

E:2023.06.11 / W:2023.06.04

E:2023.06.10 / W:2023.05.28

E:2023.05.21 / W:2023.05.14

E:2023.04.16 / W:2023.04.15

E:2022.12.10 / W:2022.12.02,03

E:2022.10.02 / W:2022.10.01

E:2022.09.10 / W:2022.09.10

E:2022.09.04 / W:2022.09.03

E:2022.09.03 / W:2022.08.30

- END -